HOME > SHOPPING INDEX > HOT GLASS INDEX > BADGER AIR BRUSH

11/08/07

BADGER'S AIR BRUSH is handy for spraying Spray A and Super Spray on glass to be fired or Shelf Primer (Kiln Wash) on slumping and draping molds. Air brush gives even coverage. Adjustable spray angle for coverage from 3/4" to 2" wide. Use Propel (pressurized environmentally safe gas) cans to supply air, or use tire adaptor (#7422) to take air from your spare. We stock replacement parts too!  

Two kits are available: 

• BASIC AIR BRUSH SET (#7400) includes spray gun, one 3/4 oz jars, propel regulator, 6 ft vinyl air hose and instructions.

• BASIC AIR BRUSH SET WITH PROPEL CAN (#7401)* is the same set as #7400 above, with the addition of a can of Propel.

REPLACEMENT PARTS AND ACCESSORIES

• PROPEL CANS, 15 OZ (#7405)* is replacement for cans found in kits above.  Environmentally safe formula.

• PROPEL REGULATOR (#7407) screws on top of Propel Can to regulate flow to your air brush.

• 3/4 OZ JAR & COVER (#7406) Use one for Spray A, one for Super Spray and one for Kiln Wash.  Saves cleaning jar every time you use a different item.

REPLACEMENT PART KIT FOR ABRASIVE GUN (#7417) has all the parts that wear out on Abrasive Guns.

8' HOSE FOR ABRASIVE GUN (#7418) gives you more freedom when working on larger projects.

6' REPLACEMENT HOSE (#7420) for when the cat chews your original.

8' VINYL HOSE WITH 1/4" PIPE ADAPTOR (#7421) for use with compressors or bottled compressed air.

1/4" COMPRESSOR ADAPTOR (#7423) is threaded on one end to accept male fitting from compressor hose, threaded on the other end to accept female fitting on your Badger hose.

SPARE TIRE ADAPTOR (#7422) uses a cheap and available compressed air source:  any spare tire.  Fits tire filler valve.

Back to Top of Page

Sunshine Glassworks Ltd.
Sunshine Square, 111 Industrial Pkwy, Buffalo, NY 14227
1-800-828-7159 or 1-716-668-2918 or fax to 1-716-668-2932
All contents and illustrations are © 1997 thru 2007 by Sunshine Glassworks Ltd.