Large 14" Diameter, Simplified Computer Controller and it Runs on 120 Volts

The GT 14-6 combines the space and performance of a large kiln with the convenience of 120V operation. This hot little unit is very capable and offers the user complete flexibility. Slump it, paint it, fuse it, anneal it.  A great entry level kiln for the serious beginner.

The Set Pro Controller is a snap use.  You easily enter the ramp (rate of temperature change) set point (the target temperature) and any soak (time spent at target temperature).  Up to eight different segments (ramp, target temperature and soak = 1 segment) may be programmed in. And the unit will store four programs (sets of segments that make up your firing schedule).

Set up is quick and easy with digital read-out and three buttons for entering your firing schedule.  While the kiln fires, the controller display shows the current kiln temperature and which segment is being processed. While your program is running, you have the flexibility to change settings on the fly.

• top elements for even heat distribution
• standard 120 volt power means no special wiring
• firing chamber dimensions are: 14.5" diameter x 6.5" deep
• maximum working temperature: 1800°F (982°C)
• draws only12A (1440W) - about the same as a toaster oven
• UL listed (US) and C-UL listed (Canada)
• Ships via UPS to your door. Motor Freight is not needed for this handy kiln

WINDOW OPTION

Order your Hot Shot Kiln with the handy Viewing Window option. No more popping the lid to see how your firing is progressing. A viewing window is the most often requested option!

NEED HELP ORDERING YOUR KILN?
The Sunshine Sales Staff will be happy to help you choose your kiln, suggest helpful options and arrange shipment of your kiln. We have been selling and using EvenHeat Kilns from the tabletop Rapid Fire 6 to the hefty front loading GTS-22 for over a decade and will be happy to help you with your selection.
Call us toll free at 1-800-828-7159 for assistance..

BACK TO TOP
STARTER KITS AND ACCESSORIES

Take the Hot Shot Above and Add A More Capable Controller

You get all of the features of the Hot Shot Kiln shown above, but with an upgraded kiln controller. The RampMaster II controller gives you added flexibility when firing. 

The RampMaster II Controller gives you ultimate control.  The digital key pad speeds entry of your firing schedule. You easily enter the ramp (rate of temperature change) set point (the target temperature) and any soak (time spent at target temperature).  Up to eight different segments (ramp, target temperature and soak = 1 segment) may be programmed in. And the unit will store six programs (sets of segments that make up your firing schedule).

While the kiln fires, the controller display shows the current kiln temperature and which segment is being processed. While your program is running, you have the flexibility to change settings on the fly.

• top elements for even heat distribution
• standard 120 volt power means no special wiring
• firing chamber dimensions are: 14.5" diameter x 6.5" deep
• maximum working temperature: 1800°F (982°C)
• draws only 12A (1440W) - about the same as a toaster oven
• UL listed (US) and C-UL listed (Canada)
• Ships via UPS to your door. Motor Freight is not needed for this handy kiln

This kiln is a great seller and even large studios use it for test firing or working on smaller projects.

WINDOW OPTION

As with the Hot Shot, the GT 14 6 Kiln can be ordered with the handy Viewing Window option. No more popping the lid to see how your firing is progressing. A viewing window is the most often requested option!

NEED HELP ORDERING YOUR KILN?
The Sunshine Sales Staff will be happy to help you choose your kiln, suggest helpful options and arrange shipment of your kiln. We have been selling and using EvenHeat Kilns from the tabletop Rapid Fire 6 to the hefty front loading GTS-22 for over a decade and will be happy to help you with your selection.
Call us toll free at 1-800-828-7159 for assistance.

BACK TO TOP

• Kiln Shelf, 12" Round
• Half pound of our favorite Shelf Primer by Bullseye
• 2-3/4" Haik brush for applying Shelf Primer
• Four 1" kiln stilts
• Assorted Stringers and Noodles by System 96
• Assorted Powders and Frits by System 96
• Two 1 lb packs of System 96 Scrap Glass
• 6x6" sheets of System 96 Clear, Black and White
• 3 oz pack of assorted System 96 Dichroic by CBS
• Thin Fire Paper sampler, four sheets 10¼ x 10¼"

Our Wednesday Walk-in Discount on kilns and accessories is 5%

Lid Lifter
This handy hook allows you to lift the kiln lid while keeping your hands a safe distance away. Wear gloves!
Order #7642
$14.99