|
12/07/07
Details
regarding our Secure Shopping Cart and Secure Check Out
RELATED LINKS
Tools
Index
DTI
Grinders
DTI Grinder Accessories
If you are not sure which head
fits your grinder check out the
Grinding Bit Reference Chart
|
|
Diamond
Max Replacement Disks
OEM replacement disks
for your Diamond Max grinders. These 6" disks will make quick work out of all your straight and
convex curved pieces.
260
Fine Grit Disk
(#2621), $79.88 replaces the original disk on your Diamond Max.
360
Extra Fine Grit Disk
(#2622), $84.88 for use with delicate glass and where a
smooth finish is desired.
|
|
Bits
by
3/4 " Bit
1/8" Bit
SPECIALTY GRINDING
BITS
Mirror Bits
3/4" Lamp Tapering Bit
Superfine Beveling Bit
45° Mitering Bit
Jewelry Bit |
Replacement
Grinding Heads
from Mika International
Replace your worn
grinding heads with a German quality grinding head from Mika
International. These bits are manufactured using a special
galvanic process to ensure long life and optimal grinding which is
uniform, fast and chip free.
-
Note:
Coarse grit approximates 60 mesh, Standard grit approximates 100-120
mesh, Fine grit approximates 200-220 mesh, & Superfine
approximates 360 mesh. The finer the mesh, the neater
the resulting edge and fewer chips. The finer the mesh, the
slower it will grind.
-
Note:
Manufacturer catalog numbers appear in [brackets].
Standard
Grinding Bits:
-
1" Standard
Grit [ME-1S]
(#37800) $33.44
-
1" Fine
Fine [ME-1F] (#37801)
$33.44
-
3/4"
Standard Grit [ME-2S]
(#37810) $24.28
-
3/4" Fine
Grit [ME-2F]
(#37811) $24.28
-
3/4" Coarse
Grit [ME-2P]
(#37812) $24.28
-
1/4"
Standard Grit [ME-3S]
(#37820) $17.15
-
1/4" Coarse
Grit [ME-3P]
(#37821) $17.15
-
1/8"
Standard Grit [ME-4S]
(#37822) $17.15
Specialty
Grinding Bits:
-
1" Mirror
Grinding Bit [ME-5F]
(#37830) $48.88, two
grooves
-
3/4"
Mirror Grinding Bit [ME-6F]
(#37831) $36.48, one
groove
-
The
Mirror grinding bits are designed to give you a nice clean,
chip-free edge to your mirrored and delicate glass. The
groove in the bit will slightly taper the back and front sides of
your glass which can be used to give a decorative edge to your
glass, help you fit ripple glass into lead channels and the
chip-free finish will help eliminate "black-edge" from
appearing on your mirrored projects.
-
3/4"
Lamp Tapering Bit [ME-7S]
(#37840) $33.98
-
The
Lamp Tapering bit will edge the vertical pieces of your copper
foiled panel lamps with either a 9o or 18o
edge so that your panels will fit tighter together. As a
result you will use less solder in the construction of your lamps
and the lamp will be stronger.
-
3/8"
Superfine Beveling bit $57.88 ea, your choice of two -
The
Beveling bit can be used to put a decorative 3/8" wide 12o
frosted bevel on any glass. Very simple to use which can give
your glass pieces a new look.
Available as 12° bevel
[ME-8SF]
(#37850) $57.88
-
-
Available as 7° bevel [ME-11SF]
(#37852) $57.88
-
-
45o
Mitering Bit [ME-9S]
(#37851) $53.78
-
The Mitering bit can be used to miter your glass pieces on 3-D
projects such as boxes, mini-houses, terrariums, ... so that the
copper foiled pieces will fit together properly. No more filling in
the gaps in the corners with lots of solder.
-
Jewelry Bit [ME-10S]
(#37860) $36.48
-
The
Jewelry bit will grind a small groove in the edge of your fused
glass projects to allow you a quick and easy wire wrap. The
groove will hold the wire securely in place without the need for
time consuming decorative wire wraps.
BACK
TO TOP
|
