HOME > SHOPPING INDEX >  TOOL INDEX > GRINDER BIT INDEX > GRINDER BIT COMPARISON CHART

03/05/10

Inland Grinders

REPLACEMENT BITS

ACCESSORY BITS

SPECIAL PURPOSE BITS

DIAMOND DISKS

GRINDER BIT COMPATIBILITY CHART FOR GLASTAR GRINDERS

GRINDER BIT COMPATIBILITY CHART FOR INLAND AND DIAMOND TECH GRINDERS

GRINDER BIT INDEX

Back To Top

 In Chart:  
Glastar Bits
Inland Bits
Mika Bits

Back To Top

Please use the chart below to determine if a particular grinding head will work on your grinder.  An "X" in the box signifies that this head will work with your grinder.  If the box is empty then the head will NOT work with your grinder.

Please also consult the Legend at the bottom of the chart for further notes instructions.

  In Chart:   [Glastar Bits]   [Inland Grinding Bits]   [Mika Grinding Bits]
 

				INLAND GRINDERS						DTI Grinders*
	CAT#	DESC	MFG#	Wizling (Pop Top or CG)	Aero	Wiz (Pop Top or CG)	Impulse	Twin Spin	Wizard	Power Max II	Diamond Max
G L A S T A R   B I T S	#0156	1" Bit/Std					X	X	X	X	X
	#0157	1" Bit/Fine					X	X	X	X	X
	#0185	1" Bit/Coarse					X	X	X	X	X
	#0151	3/4" Bit/Std		X	X	X	X		X	X	X
	#0153	3/4" Bit/Fine		X	X	X	X		X	X	X
	#01516	3/4" Bit/Coarse		X	X	X	X		X	X	X
	#0176	5/8" Bit/Std
	#0171	5/8" Bit/Fine
	#0152	1/4" Bit Adaptor		X	X	X	X	X	X	X	X
	#0177	1/4" Bit/Std		AG	AG	AG	AG	AG	AG	AG	AG
	#0161	1/4" Bit/Fine		AG	AG	AG	AG	AG	AG	AG	AG
	#0155	1/8" Bit/Std		AG	AG	AG	AG	AG	AG	AG	AG
	#0154	1/8" Bit/Fine		AG	AG	AG	AG	AG	AG	AG	AG
	#01517	3/4" Lamp		X	X	X	X	X	X	X	X
	#01518	3/4" Radius		X	X	X	X	X	X	X	X
	#01519	3/4" Ripple		X	X	X	X	X	X	X	X
	#0186	Jewelry Bit		X	X	X	X	X	X	X	X

				INLAND GRINDERS						DTI Grinders*
	CAT#	DESC	MFG#	Wizling (Pop Top or CG)	Aero	Wiz (Pop Top or CG)	Impulse	Twin Spin	Wizard	Power Max II	Diamond Max
I N L A N D   B I T S
	#3825	1" Std Bit	WB-9				OE	OE	OE	X	X
	#3826	1" Speed Grit Bit	WB-9SG				X	X	X	X	X
	#38265	1" Super Speed	WB-9SSG				X	X	X	X	X
	#3820	3/4" Std Bit	WB-1	OE	OE	OE	X		X	X	X
	#3821	3/4" Speed Grit Bit	WB-1SG	X	X	X	X		X	X	X
	#38215	3/4" Super Speed	WB-1SSG	X	X	X	X		X	X	X
	#3823	1/4" Std Bit	WB-8	X	X	X	X	X	X	X	X
	#3824	1/4" Speed Grit Bit	WB-8SG	X	X	X	X	X	X	X	X
	#3834	WB-A Adaptor	WB-A	X	X	X	X	X	X	X	X
	#3835	1/8" Bit	WB-318	AI	AI	AI	AI	AI	AI	AI	AI
	#3836	1/4" Bit	WB-314	AI	AI	AI	AI	AI	AI	AI	AI
	#3837	3/8" Bit	WB-338	AI	AI	AI	AI	AI	AI	AI	AI
	#3814	5" Disc	40500					X

				INLAND GRINDERS						DTI Grinders*
	CAT#	DESC	MFG#	Wizling (Pop Top or CG)	Aero	Wiz (Pop Top or CG)	Impulse	Twin Spin	Wizard	Power Max II	Diamond Max
M I K A   B I T S	#37800	1" Std Bit	ME-1S				X	X	X	X	X
	#37801	1" Fine Bit	ME-1F				X	X	X	X	X
	#37810	3/4" Std	ME-2S	X	X	X	X		X	X	X
	#37812	3/4" Power	ME-2P	X	X	X	X		X	X	X
	#37820	1/4" Std	ME-3S	X	X	X	X	X	X	X	X
	#37822	1/8" Std	ME-4S	X	X	X	X	X	X	X	X
	#37830	1" Mirror	ME-5F				X		X	X	X
	#37831	3/4" Mirror	ME-6F	X	X	X	X		X	X	X
	#37852	Beveling Bits	ME11SF	X	X	X	X		X	X
	#37860	Jewelry Bit	ME-10S	X	X	X	X	X	X	X	X

  In Chart:   Glastar Bits   Inland Grinding Bits   Mika Grinding Bits
Back To Top

NOTES:

*  OE -- Original Equipment as sold with the grinder originally

*  X1 -- The G3 Glastar grinder's work surface can be modified to accept a 1" head by enlarging the hole or using a G6 repl work surface.
*  AG -- Requires the Glastar Adaptor #0152.
*  AI   -- Requires the Inland Adaptor #3834.

NOTE: The Glastar G6 and G8 (AllStar) grinders CAN NOT USE ANY 3/4" bits because of their water pumps

 

NOTE: DTI grinders have changed the size of their shafts starting with model year 2000.  The newer (RED CASE) models have a 5/16" shaft and will except the grinding heads listed in the chart.  Older (BLUE CASE) models had a larger shaft and can utilize only Mika grinding bits.

Sunshine Glassworks Ltd.
Sunshine Square, 111 Industrial Pkwy, Buffalo, NY 14227
1-800-828-7159 or 1-716-668-2918 or fax to 1-716-668-2932

All contents and illustrations are © 1997 thru 2010 by Sunshine Glassworks Ltd.