|
03/18/08
RELATED LINKS
Glastar Grinders
Inland Grinders |
| |
Diamondstar |
Superstar |
Allstar |
| Manufacturer |
Glastar |
Glastar |
Glastar |
| Work
Surface |
8¼"
x 9¼" |
8¼"
x 9¼" |
11"
x 13" |
| Grinding
Heads |
3/4"
Quik Fit Bit |
3/4",
1/4" |
1",
1/4" |
| Horsepower |
1/18 |
1/12 |
1/9 |
| RPM |
3450 |
3450 |
3560 |
| Torque
(in.-oz.) |
14 |
19 |
42 |
| Shaft
Diameter |
5/16"
stainless steel |
5/16"
stainless steel |
5/16"
stainless steel |
| Retail
Price |
$106.98 |
$134.98 |
$229.98 |
| Special
Features |
Built
in accessory drawer, coolant drain, New Quik Fit Bit System |
Built
in accessory drawer, straight edge guide, coolant drain |
water
pump to 1/4" head, 2nd story work surface, glass eye shield
and support, straight edge guide, coolant drain |
| Warranty
(# of years)*** |
5 |
5 |
5 |
| Comments |
Very
good starter model |
Better
intermediate grinder that will stand up to a lot of use.
Great backup grinder for professional studios |
Excellent
studio, professional grade with all the accessories you'll want. |
| |
Wizling
CG |
Wiz
CG |
Wizard
Mark IV |
Twin-Spin |
| Manufacturer |
Inland |
Inland |
Inland |
Inland |
| Work
Surface |
9"
x 10" |
9"
x 10" |
14½"
x 11½" |
** |
| Grinding
Heads |
3/4" |
3/4",
1/4" |
1",
1/4" |
1",
1/4", 5" disc |
| Horsepower |
1/18 |
1/15 |
1/9 |
1/15 |
| RPM |
3450 |
3500 |
3550 |
3500 |
| Torque
(in.-oz.) |
15 |
30 |
31 |
26 |
| Shaft
Diameter |
5/16"
stainless steel |
5/16"
stainless steel |
5/16"
stainless steel |
5/16"
stainless steel |
| Retail
Price |
$108.88 |
$139.98 |
$224.68 |
$242.58 |
| Special
Features |
reversible
grid, LiftOff Reservoir |
reversible
grid, LiftOff reservoir, Invisible Sponge |
Second
Story worksurface, Face Shield, Reversible Grid |
22½/45/60/90
miter maker bars, 2 compound angle bars, can be concerted into
Touch Top Impulse grinder in minutes |
| Warranty
(# of years)*** |
5 |
5 |
5 |
5 |
| Comments |
Good
starter |
Better
intermediate |
Good
studio grinder, for the experienced hobbyist |
Disc
grinder that can grind with outer surface of disc |
NOTES:
*
9¼ x 5" work surface is for use with 1" grinding head.
configuration) the disc work surface is approx. 10.5" x 3.5" and reg.
bit work surface is 5.5" x 4".
***
Warranties do not cover grinding heads, work surfaces, face shields or
sponges
|
