USE WITH ALL TYPES OF METAL CAME

Adds Structural Strength and Sealing Over Conventional Putty or Cement

Available in three colors
Black
Pewter
Clear

No Days Glaze will save you time and increase productivity. No mess, no cleanup, no fumes, no waiting to cure.

Simply slip a strip of No Days Glaze into the came channel, insert your glass, heat and you're done.

IMPORTANT INFO IF YOU ARE PRODUCING WINDOWS FOR INSTALLATION IN INSULATED GLASS UNITS:
There is no out-gassing with No Days Glaze. All other cements and glazing compounds will release vapors as they cure. These vapors will fog the inside of Insulated Glass Units. To avoid this fogging, you must allow three to four weeks for traditional glazing methods to cure. Since No Days does not cure in this fashion, your panel may be installed in the IG unit immediately.

Insert strip of No Days Glaze into came channel and position your glass.

Heat your work where the glass meets the came

No Days Glaze will cure at 160°F. Excessive heat is NOT required, however we recommend the use of a Heat Gun to ensure quick and thorough heating.

Press the glass into the came channel and let cool

Allow your glass to cool while you start work on the next piece.

CLICK HERE TO FIND OUT MORE ABOUT NO DAYS GLAZE

CHOOSE THE CHANNEL HEIGHT YOU REQUIRE

The most popular sizes (in bold red) are in stock at Sunshine for immediate shipment. Other sizes are  drop shipped from the manufacturer, please call or e-mail for details

• 9/64" (0.140") - narrow
• 5/32" (0.156") - fits most of the lead, brass, copper and zinc cames sold by Sunshine
• 3/16" (0.188") - fits some of the heavier cames sold by Sunshine
• 13/64" (0.203") - wide
• 7/32" (0.219") - wider
• 1/4" (0.250") - widest

ORDERING INFO

SOLD IN 25 FT ROLLS
Prices shown are per ROLL.

LEAD STOPS

LEAD STOPS, PK OF 25 (#08849) are handy plastic items that work to hold your glass and came in place while assembling your panel.  One side is "male" to hold the came in place, one side is "female" to hold the glass in place.  Sturdy plastic is soft enough to be gentle on your glass yet firm enough to hold everything in place.  Use with lead, zinc, brass or copper cames.  Pack of 25 should be enough for most projects. 
$6.69 per pack of 25 = Recommended accessory for working with No Days Glaze!

NO DAYS GLAZE HEAT GUN

We recommend the use of a heat gun for activating the No Day Glaze.

$29.98 ea

SAMPLE SETS FOR YOUR EVALUATION

We have put together a complete information package and sample kit so you can properly evaluate this new and exciting product.

• Five foot samples of clear, black and pewter No Days Glaze. All are 5/32" wide (the most popular size),
• Information sheets showing proper use
• Road Test article by Joe Porcelli
• Lead Panel Construction article from Glass Patterns Quarterly showing NDG use
• FAQ sheet
• Quick Reference Guide for cames and No Days specs.

Order # NDG-SAM
$7.98

MORE INFO

• NO DAYS GLAZE THREE SIDE ADVANTAGE- see how No Days Glaze gives better performance than traditional cements (55 kb)
• NO DAYS GLAZE FREQUENTLY ASKED QUESTIONS - Photos of NDG in use and have your concerns addressed (126 kb)
• GLASS PATTERNS QUARTERLY ARTICLE - See NDG used in the construction of a simple leaded panel (730kb)
• THREE WAYS TO APPLY NDG - Three  methods for using NDG are shown (164 kb)
• QUICK SIZE GUIDE - A quick reference spec sheet for came sizes and No Days Glaze Specifications (50 kb)
• NO DAYS GLAZE PHYSICAL PROPERTIES - If you're an engineer, you'll love this sheet as it shows technical data regarding strength and durability in the test lab.(54 kb)

Click Here view an on-line video of No Days Glaze in use
The Video will play in a new window. When finished, close the new window.

RATHER THE MORE TRADITONAL CEMENT?

Try Miracle Mudd

This two part kit mixes quickly and easily to make a traditional cement.

Click here for complete information on Miracle Mudd

Return to Top