Sunshine Glassworks stocks replacement bits for
all of the popular grinders on the market
Which bit will fit your grinder?
See our Grinder Bit Compatibility
Charts for more info:
Click Here for Chart for Glastar
Grinder
Click Here for Chart for Inland and Diamond
Tech Grinders
QUICK INDEX TO THIS PAGE
3/4" BITS:
Standard Coarse
Fine Super Fine
Ultra Fine
1" BITS: Standard
Coarse Fine Super
Fine
Ultra Fine
5/8" BITS For Starlet |
|
3/4 in GRINDER BITS |
|
STANDARD 100 GRIT
BITS, 3/4"
These are the most popular bits. 100 grit is the
best combination for speed and smooth finish. |
|
 |
GLASTAR 3/4" STANDARD GRIT
Finest quality.
Made in USA
Order #0151, $38.79
|
INLAND 3/4" STANDARD GRIT
Our best selling bit, Inland #WB-1
Made in USA
Order #3820, $19.78
|
 |
 |
MIKA 3/4" STANDARD GRIT
A cost effective choice
Made in Germany
Order #37810, $29.88
|
TWOFER 3/4" STANDARD GRIT BITS
Sold in a package of two bits
Made in China
Order #27000, $27.56 |
 |
|
COARSE 60 GRIT
BITS, 3/4"
Coarse grit bits grind a lot faster, but are more
likely to chip the edge. Coarse grit bits are used where speed is
most important and the edges will be covered by foil or lead. |
 |
GLASTAR 3/4" COARSE GRIT
Finest quality and very long lasting.
Made in USA
Order #01516, $45.99
|
INLAND 3/4" SPEEDGRIT BIT
Inland # WB-1SG with black ring
Made in USA
Order #3821, $22.88
|
 |
|
|
MIKA 3/4" POWER GRIT
A cost effective choice
Made in Germany
Order #37812, $29.88
|
INLAND 3/4" SUPERSPEEDGRIT BIT
Inland # WB-1SSG with red ring
Made in USA
Order #38215, $22.88
|
 |
|
FINE
200-220 GRIT
BITS, 3/4"
Fine grit will grind slower, but will leave a
smoother finish. Preferred grit for grinding soft glasses such as
window glass, mirror or antique glass. Also used where the ground
edge will be exposed (not covered by foil or lead). |
 |
INLAND 3/4" FINE GRIT BIT
Inland # WB-1F with orange ring
Made in USA
Order #3820-F, $22.88
|
 |
|
 |
GLASTAR 3/4" FINE GRIT
Finest quality.
Made in USA
Order #0153, $38.79
|
TWOFER 3/4" FINE GRIT BITS
Sold in a package of two bits
Made in China
Order #27010, $27.56 |
|
|
SUPER
FINE 400 GRIT
BITS, 3/4"
Ultra fine bits will leave a soft satin finish edge on
your glass. Can be used as intermediate step before using ultra fine
bits below. A preferred grit to use with delicate glass, such as
dichroic as the super fine grit is less likely to cause the coatings
to flake. |
 |
INLAND 3/4" SUPER FINE GRIT BIT
Inland # WB-1SF with green ring
Made in USA
Order #3820-SF, $22.88
|
|
|
|
ULTRA FINE
600 GRIT
BITS, 3/4"
Ultra fine bits will leave an ultra satin
finish edge on your glass. Many fusers will use these bits as a last
step before fire polishing jewelry pieces as the extra smooth glass
surface will polish easier with less chance of devitrification. |
 |
INLAND 3/4" ULTRA FINE GRIT BIT
Inland # WB-1UF with white ring
Made in USA
Order #3820-UF, $22.88
|
TWOFER 3/4" ULTRA FINE GRIT BITS
Sold in a package of two bits
Made in China
Order #27015, $32.46 |
|
|
1 in GRINDER BITS |
|
STANDARD 100 GRIT
BITS, 1"
These are the most popular bits. 100 grit is the
best combination for speed and smooth finish. |
|
 |
GLASTAR 1" STANDARD GRIT
Finest quality. Outlasts all others
Made in USA
Order #0156, $49.99
|
INLAND 1" STANDARD GRIT
Our best selling bit, Inland #WB-9
Made in USA
Order #3825, $23.88
|
 |
 |
MIKA 1" STANDARD GRIT
A cost effective choice
Made in Germany
Order #37800, $38.44
|
TWOFER 1" STANDARD GRIT BITS
Sold in a package of two bits
Made in China
Order #27001, $32.51 |
 |
|
COARSE 60 GRIT
BITS, 1"
Coarse grit bits grind a lot faster, but are more
likely to chip the edge. Coarse grit bits are used where speed is
most important and the edges will be covered by foil or lead. |
|
|
GLASTAR 1" COARSE GRIT
Finest quality and very long lasting.
Made in USA
Order #0185, $55.99
|
INLAND 1" SPEEDGRIT BIT
Inland # WB-9SG with black ring
Made in USA
Order #3826, $25.88
|
 |
|
|
|
INLAND 1" SUPERSPEEDGRIT BIT
Inland # WB-9SSG with red ring
Made in USA
Order #38265, $25.88
|
 |
|
FINE
200-220 GRIT
BITS, 1"
Fine grit will grind slower, but will leave a
smoother finish. Preferred grit for grinding soft glasses such as
window glass, mirror or antique glass. Also used where the ground
edge will be exposed (not covered by foil or lead). |
 |
INLAND 1" FINE GRIT BIT
Inland # WB-9F with orange ring
Made in USA
Order #3825-F, $25.88
|
|
|
|
|
MIKA 1" FINE GRIT
A cost effective choice
Made in Germany
Order #37801, $38.44
|
TWOFER 1" FINE GRIT BITS
Sold in a package of two bits
Made in China
Order #27011, $32.51 |
 |
|
SUPER
FINE 400 GRIT
BITS, 1"
Ultra fine bits will leave a soft satin finish edge on
your glass. Can be used as intermediate step before using ultra fine
bits below. A preferred grit to use with delicate glass, such as
dichroic as the super fine grit is less likely to cause the coatings
to flake. |
 |
INLAND 1" SUPER FINE GRIT BIT
Inland # WB-9SF with green ring
Made in USA
Order #3825-SF, $25.88
|
|
|
|
ULTRA FINE
600 GRIT
BITS, 1"
Ultra fine bits will leave an ultra satin finish edge on
your glass. Many fusers will use these bits as a last step before
fire polishing jewelry pieces as the extra smooth glass surface will
polish easier with less chance of devitrification. |
 |
INLAND 1" ULTRA FINE GRIT BIT
Inland # WB-9UF with white ring
Made in USA
Order #3825-UF, $25.88
|
TWOFER 1" ULTRA FINE GRIT BITS
Sold in a package of two bits
Made in China
Order #27016, $37.41 |
|
|
5/8 in GRINDER BITS |
|
FITS GLASTAR
G-5 STARLET GRINDER ONLY
Glastar hasn't made Starlets
for decades, but they are still running strong, a testament to
Glastar's quality. We have your replacement bits here! |
|
 |
GLASTAR 5/8" STANDARD GRIT
As shipped with your grinder originally
Made in USA
Order #0176, $25.48
|
GLASTAR 5/8" FINE GRIT
For a smoother edge
Made in USA
Order #0171, $25.48
|
|
|
MORE BITS |
|
|
REPLACEMENT BITS
3/4 and 1" bits in standard, fine and
coarse. |
SPECIAL PURPOSE BITS
Bits for beveling, mitering and jewelry making |
 |
|
 |
ACCESSORY BITS 1/4, 1/8
and 3/8" bits |
DIAMOND
DISKS Disks for Glastar
G-9 Disk Grinder, Inland's TwinSpin and Diamond Tech Diamond Max |
 |
|
NOTE: Most bits will fit
grinders by different manufacturers. Inland bits can be used on
Glastar grinders and vice versa. The compatibility charts (links
above) will give you details. |
