 |
|
 |
SPECIALTY GLASS CUTTERS |
|
HOME > SHOPPING INDEX > TOOL INDEX > SPECIALTY CUTTERS |
|
|
|
|
|
SPECIALTY GLASS CUTTERS |
|
HOME > SHOPPING INDEX > TOOL INDEX > SPECIALTY CUTTERS |
|
03/18/08 RELATED LINKS |
Circle and Oval Cutters
FLETCHER CIRCLE AND OVAL CUTTER (#0868) takes the headache out of cutting ovals. Cuts beautiful ovals with little effort or setup time. Cuts circles from 4½ to 21", and any oval with a height of up to 3" larger than the width, up to 21x24". $133.98 REPLACEMENT WHEEL (#08681) easily snaps into place. $20.38 COMBINATION
STRIP & CIRCLE CUTTER (#0864) by Glastar, cuts equal size
strips or perfect circles. Cutter head has six steel wheels for long life.
Does circles 3 to 24" diameter, strips from 1/2 to 12"
wide. $39.98
GLASTAR
REPLACEMENT CUTTER HEAD (#0866) has six sharp steel
wheels. $13.18
LENS
CIRCLE CUTTER (#0865) allows you to quickly cut circles in glass
from 3/4 to 5" diameter. Takes little or no practice to get
quick results. Push down on the crank and turn! It's fast, it's
easy! $54.88
REPLACEMENT CUTTER WHEEL FOR LENS CIRCLE CUTTER ABOVE (#08651) If you're cutting lots of circles, you might want a spare cutter wheel. $13.79
|
|
|
RELATED LINKS |
|
EPHREM'S BOTTLE CUTTER
KIT (#0871) makes cutting bottles simple! Lay the bottle on the cutter, roll, apply heat (candle provided) and then cold (you supply the ice cube) and you're done. Kit includes cutter, candle, polishing materials and instructions! Plenty of ideas to make decorative items using empty bottles! $45.88 |
|
|
||
|
DIAMOND GLASS DRILLS by Glastar can be used in any portable electric drill. Each drill will make hundreds of holes using water as a coolant. Three sizes are available:
CORE DRILL BITS TWOFER 1/8” CORE DRILL BIT Use this bit in any drill press or hand drill. If drilling using a hand held drill, be sure to keep the bit straight up and down. Regardless of which drill you use, be sure to keep the bit wet at all times to prevent thermal shocking the glass and for greater bit life. MICROMITE DIAMOND DRILLS are perfect for drilling tiny holes in glass (fused jewelry, ...) with a Dremel tool. Industrial diamonds are metal bonded to steel shaft. Must be water cooled. Sold in packs of three:
|
 Glass Drills from Glastar
|
|
| HOME | SPECIALS | NEW PRODUCTS | ||
| SHOPPING INDEX | NEWSLETTER | DIRECTIONS & MAP | ||
| OUR CATALOG | PRIVACY | LINKS | ||
|
|
||||
